Skip to content

Product liability: defects, warnings, defenses and the damages cap in Michigan

6 plain answers on product liability in Michigan, each with the statute or court rule behind it. Contact me 24/7 by text on WhatsApp.

These are general answers about Michigan law, not advice about your situation. Each answer links to the statute, court rule or case it rests on. Last reviewed October 2026.

By Mitchell S. Bisson, Michigan attorney (P79807). Reviewed October 2026.

Quick answers

The short version

What counts as a product liability action in Michigan, and who can I sue?

A product liability action is a claim, on any legal theory, for death, injury or property damage caused by the production of a product. Production covers design, manufacture, warnings, marketing and selling (MCL 600.2945(h), (i)). You can sue the manufacturer. A seller that did not make the product is liable only if it failed to use reasonable care or made an express warranty the product did not meet (MCL 600.2947(6)).

What do I have to prove in a Michigan design defect case, and do I need to show a safer alternative design?

Michigan judges a design under a risk-utility test: whether the design created an unreasonable risk of foreseeable injury, weighed against its usefulness, by looking at the manufacturer's design choices (Prentis v Yale Mfg Co, 421 Mich 670). Expect to prove how large the risk was and that a safer, workable alternative existed. For production defects, MCL 600.2946(2) expressly requires a practical and technically feasible alternative.

What do I have to show to win a failure to warn claim against a manufacturer in Michigan?

You have to prove the manufacturer knew or should have known of the risk from the scientific, technical or medical information reasonably available when your unit left its control (MCL 600.2948(3)). There is no liability for failing to warn of a material risk that is or should be obvious to a reasonably prudent user or common knowledge (MCL 600.2948(2)), and a manufacturer is generally not liable for inadequate warnings to a sophisticated user (MCL 600.2947(4)).

Michigan law, reviewed October 2026. General information, not advice about your situation. Select a question for the full answer and the authority behind it.

What counts as a product liability action in Michigan, and who can I sue?

A product liability action is a claim, on any legal theory, for death, injury or property damage caused by the production of a product. Production covers design, manufacture, warnings, marketing and selling (MCL 600.2945(h), (i)). You can sue the manufacturer. A seller that did not make the product is liable only if it failed to use reasonable care or made an express warranty the product did not meet (MCL 600.2947(6)).

The definitions are in MCL 600.2945. A product includes every component part, so the maker of a defective part can be a defendant along with the maker of the finished product. The label on your claim does not take it outside the statute: in Heaton v Benton Constr Co, 286 Mich App 528 (2009), the Court of Appeals reasoned that a negligence theory can still be a product liability action, because the definition covers any legal or equitable theory. Who answers for the harm depends on the defendant's role. A manufacturer is measured against the standards in MCL 600.2946 to 600.2948. A seller that is not the manufacturer is liable only under MCL 600.2947(6): it failed to use reasonable care (which includes breach of an implied warranty) and that failure was a proximate cause of the injury, or it made an express warranty that the product did not meet. Curry v Meijer, Inc, 286 Mich App 586 (2009), applied that language to a retailer. Before choosing defendants, identify every company in the chain of design, manufacture and sale, and keep the product and its packaging. The deadline is a separate question and is generally three years under MCL 600.5805(12).

Authority: MCL 600.2945; MCL 600.2947; MCL 600.5805; Heaton v Benton Constr Co, 286 Mich App 528 (2009); Curry v Meijer, Inc, 286 Mich App 586 (2009). Reviewed Oct. 2026.

What do I have to prove in a Michigan design defect case, and do I need to show a safer alternative design?

Michigan judges a design under a risk-utility test: whether the design created an unreasonable risk of foreseeable injury, weighed against its usefulness, by looking at the manufacturer's design choices (Prentis v Yale Mfg Co, 421 Mich 670). Expect to prove how large the risk was and that a safer, workable alternative existed. For production defects, MCL 600.2946(2) expressly requires a practical and technically feasible alternative.

In Prentis, the Michigan Supreme Court adopted a pure negligence, risk-utility test for claims against manufacturers based on defective design. Gregory v Cincinnati Inc, 450 Mich 1 (1995), describes the traditional way to prove negligent design as asking whether a risk-utility analysis favored an available safer alternative, and it recites the Court of Appeals' description of a prima facie case based on a missing safety device: the magnitude of the foreseeable risk, including how likely the accident was and how severe the injuries could be, and alternative safety devices that would have been effective as a reasonable way to reduce that risk, weighed against their cost and effect on use. Separately, MCL 600.2946(2) says that for harm caused by a production defect the plaintiff must show the unit was not reasonably safe when it left the maker's control and that a practical, technically feasible alternative production practice then existed that would have prevented the harm without significantly impairing the product or creating equal or greater risk. Because MCL 600.2945(i) defines production to include design, expect a defendant to argue that subsection applies to a design claim as well. Precautions adopted after the injury are admissible only to prove feasibility, if disputed, or to impeach (MCL 600.2946(3)).

Authority: Prentis v Yale Mfg Co, 421 Mich 670; 365 NW2d 176 (1984); Gregory v Cincinnati Inc, 450 Mich 1 (1995); MCL 600.2946; MCL 600.2945. Reviewed Oct. 2026.

What do I have to show to win a failure to warn claim against a manufacturer in Michigan?

You have to prove the manufacturer knew or should have known of the risk from the scientific, technical or medical information reasonably available when your unit left its control (MCL 600.2948(3)). There is no liability for failing to warn of a material risk that is or should be obvious to a reasonably prudent user or common knowledge (MCL 600.2948(2)), and a manufacturer is generally not liable for inadequate warnings to a sophisticated user (MCL 600.2947(4)).

The obvious-risk rule is judged objectively. In Greene v A P Prods, Ltd, 475 Mich 502 (2006), the Michigan Supreme Court read MCL 600.2948(2) to look at the reasonably prudent product user, not what the injured person personally knew, and held there was no duty to warn about hair oil that an infant swallowed and inhaled, because the risk of harm from a child having the oil was obvious. A sophisticated user is someone who, through training, experience, a profession or legal obligations, is or is expected to know the product's properties and hazards; an employee without actual knowledge of the hazard is not one (MCL 600.2945(j)). In Heaton v Benton Constr Co, 286 Mich App 528 (2009), a builder with limited experience was not a sophisticated user, and the court added that MCL 600.2947(4) addresses only the adequacy of a warning, not a broader claim about instructions. That subsection also yields to a statute or regulation that requires a warning. A manufacturer's duty to use reasonable care after the product is sold is not limited by this section (MCL 600.2948(4)). If the court finds the defendant actually knew of the defect and willfully disregarded it, MCL 600.2949a switches off MCL 600.2948(2) and 600.2947(1) to (4).

Authority: MCL 600.2948; MCL 600.2947; MCL 600.2945; MCL 600.2949a; Greene v A P Prods, Ltd, 475 Mich 502 (2006); Heaton v Benton Constr Co, 286 Mich App 528 (2009). Reviewed Oct. 2026.

Can a manufacturer avoid liability by saying I altered or misused the product?

Only if the alteration or misuse was not reasonably foreseeable. A manufacturer or seller is not liable for harm caused by an alteration or by misuse of a product unless the alteration or misuse was reasonably foreseeable, and the judge, not the jury, decides both questions (MCL 600.2947(1), (2)). Misuse includes use contrary to a warning or instruction (MCL 600.2945(e)). Foreseeability turns on what the manufacturer knew or should have known when it made the product.

Alteration means a material change after the product leaves the maker's control, including removing a safety feature or skipping routine maintenance (MCL 600.2945(a)). Misuse means use in a materially different manner than intended (MCL 600.2945(e)). In Iliades v Dieffenbacher North America Inc, 501 Mich 326 (2018), the Michigan Supreme Court said the crucial inquiry on foreseeability is whether, at the time the product was manufactured, the manufacturer was or should have been aware of that misuse, which may depend on whether the misuse was a common practice or foreseeability was inherent in the product. Other defenses are separate: a manufacturer or seller is not liable if the user knew the use created an unreasonable risk and voluntarily accepted it and that risk caused the injury, though that does not excuse reasonable care in production (MCL 600.2947(3)), or if the harm came from an inherent characteristic that cannot be removed without substantially compromising the product and is recognized by a person with ordinary community knowledge (MCL 600.2947(5)). Your own share of fault reduces damages under MCL 600.2959 (the current version governs causes of action arising on or after March 28, 2013), and a plaintiff more at fault than everyone else combined recovers no noneconomic damages. MCL 600.2949a can remove several of these defenses where the defendant knew of the defect.

Authority: MCL 600.2947; MCL 600.2945; MCL 600.2959; MCL 600.2949a; Iliades v Dieffenbacher North America Inc, 501 Mich 326 (2018). Reviewed Oct. 2026.

If a product met federal or state safety standards, can I still bring a product liability claim?

Yes, but the manufacturer or seller gets a rebuttable presumption of no liability if, when the unit was sold to the first purchaser or user, the part that allegedly caused the harm met relevant federal or state statutory standards or was approved by, or met the regulations of, an agency that reviews the product's safety (MCL 600.2946(4)). The presumption does not apply if the court finds the defendant knew of the defect and willfully disregarded it (MCL 600.2949a).

The presumption is tied to the standard relevant to the event that caused the injury and to the aspect of the product that allegedly caused the harm. Breaking a standard does not raise a presumption that the maker was negligent, and evidence of compliance or noncompliance with a standard not relevant to the event is inadmissible (MCL 600.2946(4)). Compliance with nongovernmental industry standards at the time of sale is admissible evidence but is not a presumption (MCL 600.2946(1)). The presumption falls away under MCL 600.2949a if the court determines the defendant had actual knowledge the product was defective, a substantial likelihood the defect would cause this injury, and willfully disregarded that knowledge. Age matters too: for a product in use for at least 10 years, MCL 600.5805(12) requires the plaintiff to prove a prima facie case without the benefit of any presumption, and the section does not say which presumptions it means. That is not a 10-year cutoff; the limitation period is three years, and MCL 600.5805(14) points to repose periods only in MCL 600.5838a, 600.5838b and 600.5839. Older articles also describe a drug-maker immunity for FDA-approved drugs. The current text of MCL 600.2946 has no such subsection (last amended by 2023 PA 285, effective February 13, 2024), so check which version applies to the date of injury.

Authority: MCL 600.2946; MCL 600.2949a; MCL 600.5805. Reviewed Oct. 2026.

Is there a cap on pain and suffering damages in a Michigan product liability case?

Yes. Noneconomic damages in a product liability action are capped at statutory base amounts of $280,000, or $500,000 if the defect caused death or permanent loss of a vital bodily function, and the State Treasurer adjusts both limits each year to match the medical malpractice limits, so the amount that applies today is higher than those base figures (MCL 600.2946a(1)). Economic losses are not capped. In a death or permanent loss case, gross negligence or the defendant's actual knowledge of the defect can lift the limit (MCL 600.2946a(3)).

Those dollar figures are the base numbers in the statute. Under MCL 600.2946a(1) the Treasurer adjusts them at the end of each calendar year so they continue to equal the limits in MCL 600.1483, so the amount that applies to your case is higher and should be taken from the Treasurer's published figures. The jury must itemize economic and noneconomic loss, is not told about the cap, and the court reduces a noneconomic award to fit (MCL 600.2946a(2)). Wessels v Garden Way, Inc, 263 Mich App 642 (2004), held that a spouse's loss of consortium claim falls under the same cap as the injured person's claim, and that the cap in effect when judgment is entered applies. The exceptions are in subsection (3): the jury finding gross negligence by a preponderance of the evidence, or the court finding the facts in MCL 600.2949a true. Rodriguez v ASE Indus, Inc, 275 Mich App 8 (2007), held in a jury trial that the court may make the MCL 600.2949a finding even if the jury found no gross negligence, and it left open whether a judge sitting as fact-finder must be consistent. The cap does not reduce economic damages such as medical expense and lost income.

Authority: MCL 600.2946a; MCL 600.2949a; Wessels v Garden Way, Inc, 263 Mich App 642 (2004); Rodriguez v ASE Indus, Inc, 275 Mich App 8 (2007), lv den 745 NW2d 753 (Mich 2008). Reviewed Oct. 2026.

Questions about a Michigan matter?

Contact me 24/7 by text on WhatsApp. Your Rights, My Fight! Call for a free initial consultation.

Law Offices of Mitchell S. Bisson 2828 Kraft Ave SE, Suite 295 Grand Rapids, MI 49512 (616) 213-3327 | MBisson@BissonLegal.com

This page provides general information about Michigan law and is not legal advice. Reading it does not create an attorney-client relationship. Laws change and every case turns on its own facts. Consult a licensed attorney about your specific situation.

Have a question about your case?

The sooner I am involved, the more I can do. I keep what you tell me private. Please share only the basics until we have spoken.